14 Trick Spells from Dark Moon's Light

Put the candles on or in a fireproof surface, light candles and stare in the space between the candles, preferabbly looking at nothing but air visualizing yourself dissappearing with the air around the candles. chant:

"As for the seen make me unseen to unworthy eyes, only those whom I see true can see me. Through the element air, cast me into your cloak of illussion until I so deem to be seen. as I blow the candles out the smoke shall illusianize me in it's feathery cloak."

Blow out the candles towards eachother, you don't move the candle to blow them out.

Visualize yourself becoming invisible in the smokes grasp, now forget the spell and continue on with your day. to reverse the spell, all ou have to do is go to the candles were you made the spell and visualize yourself reappearing in the middle of the two candles, now relight the candles and say:

"As may as I might, the sight of light falls onto my face as step out of the cloak illusionary flight."

Spell is now done... have fun.

Ok, there are about three different easy ways you can tell that energy you are gathering to do what you want, they are visually, tactually, and conceptually, but don't let the words scare ya.

Visual Programming is done by telling the energy what to do by using a picture. Some of you may remember these pictures. Well, they are there to give you something to visualize while you gather the energy.

To program visually, as you gather the energy, picture a ball in your mind. Pushing the psi outwards, think of the ball, and then as you finish, the psi should be formed into a ball. Easy, huh? Those of you that have already made a psi-ball may want to picture a ball of fire for a hot psi-ball.

Tactile Programming is done by telling the energy how to be by using a feel.

To program tactually, as you gather the energy, focus on how it feels. Visualize how you want it to feel. As you send the psi out of your hands, remember the feeling you are trying to create. For example, in creating a hot psi-ball, remember a time you felt very hot, and focus on that hot feeling as the energy accumulates.

Conceptual Programming is done by telling the energy what to do without a picture, or feeling or words.

I know that initial statement may have scared some people off a bit, but it is easier than it sounds. In one of the first psychic books I read, there was a visualization exercise. First, see what you are trying to create. If you cannot do that, get the feel of it. If you cannot do that, just know that it is there. This can help with some of the trickier programmed constructs.

To program conceptually, when you are forming your construct of energy, get a clear goal of what you want it to do. When you send the psi out, think of things associated with what you want to do. For a hot psi-ball, think of things you associate with the word "hot" (ex. desert, fire, stove, ect.), and tell the energy to be like that.

A friend, while writing this told me that he always had a hard time thinking of the color green, and to program his constructs with a green color, he always had to think of a jungle; this is a prime example of conceptual programming. By thinking of the jungle, his sub-conscious picks up on the color green, and programs the construct with the green color.

Summary

Decide what you want to accomplish: in this case a cold psi-cube
Decide on a method of visualization (multiple, if you can keep track of it)
Gather psi
Think of it as a cube with things you associate with a cube (conceptual), or see it forming into a cube (visual), or feel the sides of a cube (tactile).
Think at it the concept of being cold along with things you think of when you hear the word cold (conceptual), or see it being icy/snowy (visual), or think at it the feeling of being cold.
Create your construct
In conclusion, you should now realize that programming is just what you do to make your constructs do what you want (ie. cool stuff). Being good at programming can allow cool-looking, cool-feeling, and useful constructs. Many times people underestimate the psi-ball, but with psi you can do many things.

The first step should be to cut off their access to a ground, if possible. Once they are cut off from grounding, your attack will be more effective, and it will be harder for them to counter it. If you can, also shield them to contain the energy. Put in a link, and dump as much energy as quickly as possible into their system.

If they have a high speed and capacity, you may want to alternate the speed...fast, slow, fast, slower, faster, etc....change as rapidly as possible, and dump as much energy with the "fast" cycles as you can. This attack causes a "stun" effect...mental confusion, lassitude, rise in body temperature, and other signs of distress.

Some folks use a "tuned shield", or a filter. This type of shield is designed to keep out certain types of patterns and/or frequencies. Overload attacks are particularly effective against this type of shielding, as you can tune your attack to match something that is allowed through their filter. I have witnessed first hand someone using "pure white light" energy to conduct a successful overload attack.

How to defend against an overload attack

A very strong shield can ward off an overload attack, but if your shield is compromised, or absorbs rather than deflects energy, then you may need to resort to other measures. The primary key to successfully defending against this attack is to recognize EARLY, before too much damage is done. Once mental confusion sets in, it is much harder to deal with it.

The first thing you must do is establish an emergency ground. If you cannot do it directly, then physically grab something metal which is grounded, and attempt to pour energy into it. If you can equalize your grounding flow with their input, then you can concentrate on breaking their link, and deflecting the energy. It's imperitive to get up a good deflective shield. If you have the ground going, and the mental resources to do it, you can also push energy back and attempt to overpower them that way. If you can harness their attack, and capture it, you can use the energy to conduct a wide variety of counter-attacks.

This is a spell that I have used when I felt that someone meant me harm or when traveling in a area where I did not think that it was to safe to be. Its very basic and all that you will need is a black candle and your will to move unseen.

Sit and envision a thick mist surrounding you from head to toe feel its coolness on your skin, feel your self becoming one with the mist and take on all its qualities Then begin chanting the spell ( this should be done nine times) the moment you begin chanting the spell light the black candle

Good luck with this one!! Remove me now from there Sights, Be it day or be it night, Cloud there vision so they Can not see. Keep me hidden from those who would hurt me, By the powers of the Morrigan, And three times three, As I speak it so shall it be! Blessed Be!

To create it, you'll want to form a mental image of what you want to project onto others. You can project yourself as "invisible" or something static (for example, a hedge, box, etc...). Whatever you choose, you should have a clear understanding of what the objects energy is like. You'll want to create a shield that emits this same type of energy. The goal isn't to physically make yourself look like a hedge, but rather to get the attacker to glance over you. Broadcast something like "Nothing to see here, just a hedge".

Another form of this shield would be to emit a "normal" human's energy field. When the attacker sees you, they'll either underestimate your ability, or ignore you completely. Obviously, visualizations of whatever you want to become work well for forming this shield. Remember though, you're not just creating a shield, your clouding the mind of your opponent. This is where telepathy is useful. Incorporate telepathic suggestion and broadcasting into the shield. Visualize your opponent becoming confused.

This isn't an easy shield to make, but it is useful. It doesn't take that long to make, just skill. With anything, practice makes perfect, and this shield is fun to practice .

In my opinion, the Force-Bubble Shield is one of the coolest out there . Just recently I've been experimenting with Force-Bubble Constructs, and the shield version is very useful and holds up against a lot of force. I can be used in combat or in any situation where you need to physically put force on an object. The downside is that it is pretty advanced and takes a lot of time to make (in most cases). Skill in telekinesis is useful.

The visualization is fairly simple but tedious. The one I use is to visualize a bunch of "psi-bricks" stacking up and forming a brick wall around myself. You'll also need some "psi-mortar" as well to stick it all together .
Also, to incorporate the idea of force, I visualize a bunch of arrows pointing outwards on the bricks. In physics, force is usually shown by an arrow, so it works well for me (having a somewhat scientific mind). Think of something that means "force" to you and use it. The key isn't necessarily the visualization, but the practice. This shield takes a lot of skill to construct properly.


The Force-Bubble Shield is extremely useful and powerful. While the previous combat shields address the issue of dealing with an attack, the last shield's purpose is to help you not get in situations where you'll get attacked. It's known as the Cloaking Shield, or in some cases, the "Hedge" Shield.

One downfall (for me) is that it takes some time to construct properly. The visualization is simple, but it just requires a lot of energy. Basically, you want to picture a thick (probably at least one foot) wall of goo. Use semi-melted marshmallows for visualization. If you construct it in layers (which I do sometimes, to make it easier), you'll want to make sure the layers melt into each other completely - they can be a pain and separate on their own sometimes. You might want to put some Bubble Shields on the outside and inside of it if you're making it really gooey. It should hold it's own shape for some time, but it might require some maintenance depending on how you make it.

As I stated above - it can take a while to make, even if you are somewhat skilled. It's not particularly good at handling sharp objects, but it's not meant to be used as the only line of defense. Combine it with other defensive shields to provide better protection. After it's made it can be repaired somewhat easily, so you can keep it up for long periods of time.

One shield that can be combined well with the Marshmallow Shield is the Force-Bubble Shield. It takes longer to construct, but provides some of the best protection.

The technique is simple and the shield can be created in about the same amount of time as a Bubble Shield. First I create a thick Bubble Shield (not necessarily strong, just thick). Then I push some parts out to form a spike, and some parts in to form a spike. When I'm finished, it's similar to a furry ball - the spikes becoming so thin they're like fibers. It's made very "loose" and the fibers flow around freely.